Sanitary Stainless Steel 304 90g-135g Closed Loop Extractor with Splatter Platter, Recovery tank, and Hose. All Stainless Steel. Pressure Tested and Vacuum Tested.
-Full Closed Loop extractor (6"x6") including recovery tank (6"x6"). with a High Pressure Clamped Splatter Platter(6"x2") SS 304 (Sealed,Pressure Tested @ 100psi for 48hrs. and Vacuum Tested @ -29.9inhg for 48hrs) - You can see the RectorSeal and PTFE Thread Sealer.
-Built in and Welded Sight Glass. Thickest option available. This makes recovery a million times easier. Literally you can see when all the solvent is gone. You can see the purge happening directly threw the glass and when you know that there is absolutely no solvent left. Using my technique, i can recover 2.9lbs of solvent in about 20-25 mins using a hot water bath at 90F.
-1.5"x18" stainless steel spool for material of choice.
-36" PTFE Lined High Pressure Stainless Steel Hose with 1/4inch JIC 37 Degree Connections Rated for 6000psi
-High Pressure Tri-clamps for every single clamp. Please if you decide not to buy from me...Make sure all clamps above 1.5" are High Pressure Clamps.
-Viton Tri-clamp Gaskets throughout the system - 2 extra gaskets are included for both 1.5" screened gaskets and 6" gaskets.
-All WOG(Water,Oil,Gas) Stainless Steel Ball Valves included rated at 1000 psi
-100 mesh 316L Stainless Steel Tri clamp gaskets are the right mesh for this application.