1lb - 6" Stainless Steel 304 Hemispheric Dewaxing Closed Loop Extractor AND Recovery Tank With Vapor, Liquid and Stainless Compound Gauge. Splatter Platter, Hose, and Extra set of Gaskets.
PARTS KIT ASSEMBLY NEEDED
Items included:
- Full 6" Hemispheric Closed Loop extractor (6"x14") with a High Pressure Clamped Splatter Platter(6"x2") SS 304 (Sealed,Pressure Tested @ 100psi for 48hrs. and Vacuum Tested @ -29.9inhg for 48hrs). Based On the tank being 6"x16" essentially you can run 7.50lbs of solvant in this extractor. Easily enough for 2lbs if you want to expand!
- 6"x12" Recovery Tank with Liquid port, Vapor Port and Built in Stainless Coumpound Gauge. The gas tank is 6"x12" which is capable of holding 6lbs of solvent at an 80% Fill.
- Dual 1" Built in and Welded Sight Glass. Thickest option available. This makes recovery a million times easier. Literally you can see when all the solvent is gone. You can see the purge happening.
- Stainless Compound Gauge (Vacuum/Pressure) on the extractor and recovery tank
- 3" shower head top cap for even distribution of solvent over you material. Really helps with "channeling"
- 3"x24" Dewaxing stainless steel spool for material of choice.
- 3" Inline Filter with Removable 100 mesh screen and Clip.
- 72" PTFE Lined High Pressure Stainless Steel Hose with 1/4inch JIC 37 Degree Connections Rated for 6000psi
- High Pressure Tri-clamps for every single clamp.
- Viton Tri-clamp Gaskets throughout the system - 3 extra 6" gaskets, 2x- 3" 100 mesh screen gaskets,2x- 1.5" 100 mesh screen gaskets and 1 extra 3" non-screened gasket are included extra. You will have an extra set for every single gasket.
- All WOG(Water,Oil,Gas) Stainless Steel Ball Valves included rated at 1000 psi. Including the 3 Piece 1.5" Ball Valve.
- 100 mesh 316L Stainless Steel Tri clamp gaskets are the right mesh for this application.
Nitro Assist Option adds Pressure Relief valves and a gauge to the material column and pressure relief valves on the collection and solvent tank!
You might also like
